Plastic Mould Steel

Plastic Mould Steel
Plastic Mould Steel
Product Code : 16
Product Description

We have marked a distinct position in the domain by supplying Plastic Mould Steel. High Alloy Steel gains improved properties by increasing the solidification rate. This gives a fine microstructure and small, well-distributed carbides in the matrix. We source this steel from the certified vendors of the market. Plastic Mould Steel has improved mechanical properties and an extremely low non-metallic inclusion level. Clients can avail our steel in different specifications as per their requirements. 

Features:

  • Hot forged and rolled
  • Used in cold work, plastic and cutting tools
  • Rugged construction 

Plastic Mould Steel

  Germany
DIN
USA
AISI
INDIAN
IS
CHEMICAL ANALYSIS (typical values) %
Min-Max
DELIVERY CONDITIONS Applications










Sr. No. Grade     C S P Si Mn Ni Cr Mo V W Others Heat Treatment Hardness (HB)  
1 1.7225 4140 42CrMo4 0.83-0.90 0.00-0.030 0.00-0.030 0.15-0.35 0.30-0.45 -0 1.60-1.90 0.20-0.35 0.05-0.15 -0 -0 As Rolled / Forged 240/260 Medium Carbon Steels for Holder / Bolster plates in Plastic Injection Moulds. Mould Base Plate.
2 1.6582 4340 34CrNiMo6 0.30-0.38 0.015-0.035 0.015-0.035 0.00-0.40 0.50-0.80 1.30-1.70 1.30-1.70 0.15-0.30 -0 -0 -0 As Rolled / Forged 240/260
3 1.2311 P-20 40CrMnNo7 0.35-0.45 0.003 0.008 0.20-0.40 1.30-1.60 -0 1.80-2.10 0.15-0.25 -0 -0 -0 Prehardened 300/330 Prehardened Steel with good Polishing & Photo-etching properties suitable for Plastic Moulds .
4 1.2738 P-20+Ni 40CrMnNiMo864 0.35-0.45 0.003 0.008 0.20-0.40 1.30-1.60 0.9-1.1 1.80-2.10 0.15-0.25 -0 -0 -0 Prehardened 280/320
or
300/330
Prehardened Ni-Cr-Mo Steel with excellent polishing & Photo-etching properties suitable for Injection Moulds, Blow Moulds .
5 1.2312 P-20+S 40CrMnMoS86 0.35-0.45 0.05-0.10 0.00-0.030 0.30-0.50 1.40-1.60 -0 1.80-2.00 0.15-0.25 -0 -0 -0 Prehardened 280/320
or
300/330
Prehardened Holder Steel with excellent machinability due to high sulphur content. NOT suitable for Polishing / Photoetching
6 1.2714 6F3 T55NiCrMo3 0.50-0.60 0.00-0.030 0.00-0.030 0.10-0.40 0.65-0.95 -0 1.00-1.20 0.45-0.55 0.07-0.12 -0 -0 Prehardened 360/400 A Cr-Ni-Mo alloyed Steel for Holder / Bolster Plates in Plastic moulds & Hot work applications.

We have marked a distinct position in the domain by supplying Plastic Mould Steel. High Alloy Steel gains improved properties by increasing the solidification rate. This gives a fine microstructure and small, well-distributed carbides in the matrix. We source this steel from the certified vendors of the market. Plastic Mould Steel has improved mechanical properties and an extremely low non-metallic inclusion level. Clients can avail our steel in different specifications as per their requirements. 

Features:

  • Hot forged and rolled
  • Used in cold work, plastic and cutting tools
  • Rugged construction 

Plastic Mould Steel

  Germany
DIN
USA
AISI
INDIAN
IS
CHEMICAL ANALYSIS (typical values) %
Min-Max
DELIVERY CONDITIONS Applications










Sr. No. Grade     C S P Si Mn Ni Cr Mo V W Others Heat Treatment Hardness (HB)  
1 1.7225 4140 42CrMo4 0.83-0.90 0.00-0.030 0.00-0.030 0.15-0.35 0.30-0.45 -0 1.60-1.90 0.20-0.35 0.05-0.15 -0 -0 As Rolled / Forged 240/260 Medium Carbon Steels for Holder / Bolster plates in Plastic Injection Moulds. Mould Base Plate.
2 1.6582 4340 34CrNiMo6 0.30-0.38 0.015-0.035 0.015-0.035 0.00-0.40 0.50-0.80 1.30-1.70 1.30-1.70 0.15-0.30 -0 -0 -0 As Rolled / Forged 240/260
3 1.2311 P-20 40CrMnNo7 0.35-0.45 0.003 0.008 0.20-0.40 1.30-1.60 -0 1.80-2.10 0.15-0.25 -0 -0 -0 Prehardened 300/330 Prehardened Steel with good Polishing & Photo-etching properties suitable for Plastic Moulds .
4 1.2738 P-20+Ni 40CrMnNiMo864 0.35-0.45 0.003 0.008 0.20-0.40 1.30-1.60 0.9-1.1 1.80-2.10 0.15-0.25 -0 -0 -0 Prehardened 280/320
or
300/330
Prehardened Ni-Cr-Mo Steel with excellent polishing & Photo-etching properties suitable for Injection Moulds, Blow Moulds .
5 1.2312 P-20+S 40CrMnMoS86 0.35-0.45 0.05-0.10 0.00-0.030 0.30-0.50 1.40-1.60 -0 1.80-2.00 0.15-0.25 -0 -0 -0 Prehardened 280/320
or
300/330
Prehardened Holder Steel with excellent machinability due to high sulphur content. NOT suitable for Polishing / Photoetching
6 1.2714 6F3 T55NiCrMo3 0.50-0.60 0.00-0.030 0.00-0.030 0.10-0.40 0.65-0.95 -0 1.00-1.20 0.45-0.55 0.07-0.12 -0 -0 Prehardened 360/400 A Cr-Ni-Mo alloyed Steel for Holder / Bolster Plates in Plastic moulds & Hot work applications.
Contact Us

Plot No. 13 A, Gala No. - 3/4/5, Magzine Street, Near Devi Dayal Compound, Darukhana, Reay Road East, Mumbai, Maharashtra, 400010, India
Phone :+917042313342